For bleaching & fluoride trays

The gel reservoir.
In one click.

DentaSolid applies the reservoir for bleaching and fluoride trays digitally — an even, adjustable gel layer, directly printable. The hand-painted block-out resin step is gone.

AdjustableThickness & coverage
Directly printableBleaching · fluoride
Same every caseNo hand-work
gel reservoir · adjustable tray shell cervical margin clear · directly printable
The problem

Hand block-out costs time — and is never quite even.

Every bleaching or fluoride tray needs a reservoir: block-out resin painted on by hand, tooth by tooth, cured, and you hope the layer came out even. It costs minutes per case, ties up staff, and the result varies. DentaSolid does exactly this step digitally — even, repeatable, in one click.

Hand block-out

  • ✕ Paint resin tooth by tooth
  • ✕ Uneven layer thickness
  • ✕ Cure it, rework it
  • ✕ Every case a little different
  • ✕ Minutes of hand-work per tray

With DentaSolid

  • ✓ Reservoir applied digitally
  • ✓ Even, defined thickness
  • ✓ Cervical margin kept clear
  • ✓ Every case exactly the same
  • ✓ One click, directly printable
The heart of it · gel reservoir

The reservoir — exactly where the gel belongs.

Set the thickness and coverage once — DentaSolid lays the reservoir evenly on the teeth you choose and keeps the cervical margin clear. The result is a directly printable model you form or print the tray over.

  • Adjustable thickness — define the gel volume exactly, from thin to generous.
  • Choose the teeth — reservoir only where you're treating; the rest stays clear.
  • Cervical margin clear — a defined gap to the gingival line, so the tray seats cleanly.
  • Directly printable — print the blocked-out model, form the tray over it. Done.
Minutes of hand-work → one click
Reservoir settingsLIVE
Layer thickness0.50 mm
CoverageTeeth 13 – 23
Cervical clearance0.80 mm
OutputSTL · directly printable
turquoise = reservoir active
Benefits

What it means for your practice.

The digital reservoir changes the tray workflow in ways you feel — from time spent to the economics of each case.

Time

Minutes saved per tray

Painting and curing block-out resin by hand disappears. Several minutes per case become seconds — every day, on every tray.

In-house

Trays the same day

Bleaching and fluoride trays are made right in the practice, with no detour through a lab. Faster for the patient, more economical for you.

Consistency

Every case exactly the same

Thickness and coverage are defined and repeatable. No variation by the day or the hand — predictable, consistent quality.

Team

No special skill needed

Laying the reservoir no longer depends on a practised hand. Anyone on the team gets the same clean result — taking the load off you.

Compatible

Your existing hardware

Any scanner (STL/OBJ/PLY) and any printer. No new hardware, no vendor lock-in, no reworking your workflow.

Privacy

Data stays local

Processing runs entirely on your own computer. No patient data leaves the machine — with no forced cloud.

The foundation

And it preps the whole model too.

For the reservoir to seat, you need a clean, solid model. DentaSolid prepares the scan completely — automatically, before the gel goes on.

01

Watertight solidification

The open scan shell becomes a closed, manifold solid — reliably printable and millable.

02

Automatic jaw classification

Detects upper vs. lower from the geometry and names each file — no manual sorting.

03

Cast-style base

A flat, level base so the model stands like a stone cast — adjustable height, clean walls.

04

Surface preserved

Occlusal detail and margins stay exactly as scanned — nothing smoothed away behind your back.

05

Boundary loop detection

Finds every open edge automatically and decides what to cap and what to keep.

06

Batch processing

Drop in a whole folder and walk away. Every file comes back solid, named and ready for the reservoir.

Three steps

From scan to finished tray.

01

Import

Drop in the scan straight from the scanner export. One case or a whole folder.

accepts .stl .obj .ply
02

Lay the reservoir

Set thickness, teeth and cervical clearance — one click, model solid + reservoir in place.

adjustable · even · margin clear
03

Print

Print the blocked-out model, form or print the tray over it — done.

directly printable
Availability

Available through the dental trade.

You get DentaSolid through the dental trade and authorised dental dealers. Your dealer handles supply, setup and your point of contact, so you can get started right away.

All updates included
Support included
Runs on your existing hardware

Distributed through the dental trade · authorised dealers

Good to know

Questions, answered.

How exactly does DentaSolid lay the reservoir?+
You pick the teeth and set the layer thickness and cervical clearance. DentaSolid applies the reservoir evenly to those teeth, keeps the cervical margin clear, and outputs a directly printable model — the same result every case.
For bleaching and fluoride trays alike?+
Yes. The adjustable thickness and coverage let you tune the reservoir for either tray type.
Which scanners and formats are supported?+
Any scanner that exports STL, OBJ or PLY — effectively all of them. DentaSolid reads the open mesh directly; no plugin on the scanner side.
Will it change my surface detail?+
No. The occlusal surface and margins are preserved exactly. DentaSolid only adds what's missing — closed walls, a base, and the reservoir you ask for.
How do I get DentaSolid?+
Through the dental trade or your dental dealer. They handle supply, setup and your point of contact.